Avaya Support Forums

Avaya Support Forums (http://support.avaya.com/forums/index.php)
-   Avaya Aura & Unified Communications (http://support.avaya.com/forums/forumdisplay.php?f=2)
-   -   Avaya System Manager and Session Manager test failure. (http://support.avaya.com/forums/showthread.php?t=13393)

mayem 02-23-2018 11:50 AM

Avaya System Manager and Session Manager test failure.
Hello everybody.
I need to know if there'ssomebody who can help me with some problems in our 4 servers: 2 -Avaya System Manager and 2 -Session Manager.
Two weeks ago, after a power failure, servers were forced out of service, electrical power was solved and the UPS now are ok, but our connections SIP are not functioning.
Replication>Synchronization is working fine with Session Manager.
from CLI, statapp command all services are UP.
From System Manager>System Tools>Maintenance Tests>Target System Manager-Execute All tests, gives a Failure in:
Test network connections to each Session Manager.

Target Session Manager1 and 2, Execute all Tests, return failures in:
Test Call Processing status Failure
Test Service Director status Failure
Test Service Host status Failure
Test SIP A/S Management Server status Failure

Also i can ping between 2 System Managers and 2 Session Manager

Thanks for any tip that can help me to know what is causing failures.

green601 02-27-2018 12:01 AM

Hi Mayem

Did you get a resolution for this issue? Was it certificate related?

mayem 02-27-2018 01:19 PM

Hi Green601
Failure is still active and is not certificate issue, problem began after a power failure, forcing all servers to shutdown, Failover was affected in System Managers too.


mlombardi1 03-01-2018 08:16 AM

Are you absolutely sure the certificates aren't expired? That is a common problem.

Verify you can ping between the servers using hostname. You don't need to enter them into DNS but the server host files need to contain the mappings. Other things to try are running a database repair from the SMGR Replication screen or reinitializing the Session Mgrs using the SMnetSetup command. This should also redo trust management between SMGR and SM.

mcginp 03-08-2018 05:50 AM

It definitely sounds like a certificate. Generally a server will continue to run on an old cert until a service is restarted or the server is rebooted.

mlombardi1 03-08-2018 06:05 AM

What version is your SM? This PSN may apply to you: https://downloads.avaya.com/css/P8/documents/101046468

lopez764 09-10-2018 02:45 PM

Replication SM
Make the replication again with your SM

okhot1 05-15-2019 09:00 AM

I think you need check DNS server. In windows you need to run "cmd", then write: nslookup sm_dns_name ip_dns_server. And repeat for all sm's and smgr's name. Don't forget about sm signaling interface (sm100).

herre37 05-17-2019 08:52 AM

Cert SIP A/S

All times are GMT -7. The time now is 04:36 PM.