Avaya Support Forums

Avaya Support Forums (http://support.avaya.com/forums/index.php)
-   Avaya Aura & Unified Communications (http://support.avaya.com/forums/forumdisplay.php?f=2)
-   -   Hp® dl360 g8 (http://support.avaya.com/forums/showthread.php?t=4540)

mscisk 04-24-2014 11:56 AM

Hp® dl360 g8
 
Hi,

I would like to ask if anyone had already installed Service Platform (6.0.3) on new HP® DL360 G8
I am asking because i found out three issues (so far):
a) Service Port is not working - bootable cd was in cdrom and i powered up server. Laptop is configured properly (verified with lab servers). Durig normal installation Console Port should be switched to Service Port after certain of time but somehow it does not work
b) additional NIC card is put into incorrect slot - known issue. BTW what for can i use those two additional interfaces (ETH4 & ETH5)?
c) because Service Port was not working i connected keybord and monitor:
- bootup server
- Avaya Aura welcome screen
- accepted with enter
- normal installation screen
- suddenly info appears that kickstart file can not be located :) So i switched to other terminal window and i see that cdrom is not mounted :D CD is ok because i used it to install other instance.

Tomorrow i will try to install it via usb but would like to know if anyone has the same problems.

cheers,
michal

mscisk 04-26-2014 09:52 AM

The problem was solved by installing newest System Platform (6.3.0).


All times are GMT -7. The time now is 09:27 PM.