![]() |
802.1x / dot1x Authentication, including Voice-Vlan and Guest-Vlan
Hello,
i have tried to configure a dot1x based Authentication. With an single host including guest-vlan, everything works fine. But i want to use an Avaya-IP-Phone (wich is every times authenticated or authenticates itself) and behind the Phone an Client. Is there a possible solution? And unfortunately Switches are Ciscos. https://supportforums.cisco.com/4.5....ticons/sad.gif i have just tried so... interface GigabitEthernet0/4 switchport access vlan 121 switchport mode access switchport voice vlan 200 authentication event fail action authorize vlan 99 authentication event server dead action authorize vlan 121 authentication event server alive action reinitialize authentication host-mode multi-host authentication order dot1x authentication port-control auto authentication periodic authentication violation restrict dot1x pae authenticator dot1x timeout quiet-period 10 dot1x timeout tx-period 1 spanning-tree portfast Thanks, for any possible solution! |
All times are GMT -7. The time now is 05:13 PM. |