Avaya Support Forums

Avaya Support Forums (http://support.avaya.com/forums/index.php)
-   IP Office Contact Center (http://support.avaya.com/forums/forumdisplay.php?f=67)
-   -   IPOCC 9.1.6 and SFDC Connector (http://support.avaya.com/forums/showthread.php?t=11131)

lebon 03-16-2016 03:36 PM

IPOCC 9.1.6 and SFDC Connector

In my customer, I have installed SFDC Connector
The Agnet connection = Done
I call the topic, the agent receive call = done
But when the agent off-hook, no "screen pop-up' ( same problem in my LAB)
in SFDC or in the script call flows, is there a set of scpecifique thing

Thank for your help !


schopdekar 03-16-2016 11:49 PM

Trying to understand the issue.

-> In normal case, when you are getting a call, screen pop is happening.
-> But when you do off-hook, and then try to receive a call, the screen pop doesn't happens ?
Is this correct ?

Which phone are you using ?
From where are you picking up the call ? from phone or SFDC app ?

lebon 03-17-2016 01:41 AM

1 Attachment(s)

Look to attachement :)
I use Avaya Communicator

schopdekar 03-17-2016 01:47 AM

Thanks, that clarified things, please use console mode :-)
Normally screen pop will happen during call ringing itself.

Screen pop is not supported in standard mode.

From IPOCC Installation Task Based Guide: Note: Some features such as screen popping, are not supported in standard mode. Additionally, the standard mode app has limitations, therefore ISA should be deployed in Console mode only.

This is because of issues in SFDC standard mode.

lebon 03-17-2016 06:50 AM

1 Attachment(s)
I am not expert to SFDC, but in console mode same probleme

schopdekar 03-17-2016 07:07 AM

Screen pop will happen only if the call is external. I am assuming this is an external incoming call.
I am assuming Softphone layout is done.

Can you please provide console output ? (you can get via right-click -> Inspect)

All times are GMT -7. The time now is 06:42 PM.