Avaya Support Forums

Avaya Support Forums (http://support.avaya.com/forums/index.php)
-   IP Telephony and Convergence (http://support.avaya.com/forums/forumdisplay.php?f=8)
-   -   How to tag LLDP packets (http://support.avaya.com/forums/showthread.php?t=2129)

pately 09-24-2012 03:40 AM

How to tag LLDP packets

I am using 9600 phones with Juniper 4200 switches, I use LLDP with voip option on juniper to get the phone to join the voice vlan.

All works fine but when I look at layer 2 switching table on the switch I see phones MAC appear in both Data & Voice vlan, the reason this is happening according to Juniper is because after joining the voice vlan the phone keeps sending untagged LLDP packets, all untagged packets on a port drop to Data vlan hence that vlan updates switching table with MAC of that phone.

I have looked at the sniffer capture and can see LLDP as untagged but all other traffic is tagged to the voice vlan as I am using L2Q = 1 in the phone DHCP options.

Does anyone know if this is a known issue with Avaya phones or how to fix it??? I have tried firmware 3.10 & 3.11 for 9640.

jppicard 01-27-2014 07:54 AM

Given lldp traffic is encapsulated inside LLC frames; then it will not be tagged .
In short; it works as design and you ll always see what you observed unless lldp is disabled

All times are GMT -7. The time now is 09:43 PM.