SIP Trunk MS Lync 2013

[aaltvedtob]

Hi,

I have a scenario with an Avaya (Sipera) SBC-E, Session Manager (6.2) and a SIP Trunk to MS Lync 2013.
Having problems getting media through to the Lync Client. The signalling seems to be working, as the client rings.
Any ideas?

Ole-Bjorn Aaltvedt

[chelungas]

Hi,
the media have to be done by the media gateway, the is signalling (only) is done with SM.
May be you can try with a sniffer on the phone to see where it tries to send the media
alternatively you must verify the settings of shuffling on: network-region, and station form.

regards!

[aaltvedtob]

I will try this, thanks for the tips

Ole-Bjorn Aaltvedt

[aaltvedtob]

I tested this, and of course it worked
Thanks again.