log message and snmp trap identification

[kradwa]

Does anyone know how or where to identify the following messages from a stack of 5 - 4850s ?

- SMGR:Ring: B 1/1 - D 2/2 - D 3/3 - D 4/4 - D 5/5
- bsnStackManagerReconfiguration
- SMGR:BAY_SEC failed DB-exchange, stack formation delayed
- SNMP:Trap: newRoot
- SNMP:Trap: entConfigChange

- SMGR:MODULE_INACTIVE event sent, unit mask 0x04, appl mask 0xBFFF7FFF
- SMGRISTRIBUTE_DB event sent, unit mask 0x01, appl mask 0x00000000
- SMGR:Remove event sent, unit mask 0x01, appl mask 0x00000000 0x00017FFF
- SMGR:Leave event sent, unit mask 0x01, appl mask 0x001BFFFD 0xBFFF7FFF

[zakabog]

From this doc https://downloads.avaya.com/css/P8/documents/100134575

MODULE_INACTIVE event sent unit mask value appl mask value
A unit has left the stack. The 'unit mask' is a bit mask representation of the unit that left the stack.
Source Severity
Stack Manager Information
Remedial action
Make sure that the unit removal is intended.

Looks like it's unit #4 (0x04)

[kradwa]

Thank you very much.