View Single Post
Old 11-07-2012, 06:48 PM
alvinewe alvinewe is offline
Join Date: Aug 2011
Posts: 3
alvinewe has 10 reputation points
Default Design to setup ERS 4524 and Cisco Cat6509

Hi All,

I would like to get some feedback on any team that has deployed a stacked ERS4524 LAN Switch connected to the Cisco 6509 Core switch. What is the best possible method and what would the configuration be.

As tested the spanning tree does not work well between the vendors. And trunking would be an option but this is connecting an access layer to the Core thus do not need a trunking mode.

- Connected the stacked switch to the Cisco core, it created a loop on that VLAN.
- Spanning tree enable on the Avaya switch but the loop still happen.
- Default spanning tree enabled on the Cisco Cat6.

Please advise if you come across any such setup before.

ERS 4542GT - Ver 5.6.1

Example of the current topology.

AVAYA ERS ----------------------- CAT 6509
| Stacked |
AVAYA ERS ----------------------- CAT 6509
Reply With Quote