View Single Post
Old 02-07-2013, 04:33 PM
rvengco rvengco is offline
Join Date: Jul 2010
Posts: 35
rvengco has 10 reputation points

Hi Nabe,

For the S8300

If you cannot use the Avaya installation wizard try the configure server in the web interface

You need to access the web interface of the S8300 via (
Then go to Installation > Configure Server click next till you will be routed to configure individual interfaces > set identities
From there you can set the IP address of the S8300 server.

For The G450

You need to connect to the services port or console port of the G450 then loggged-in from there

Once logged-in to G450

To replace the default gateway
1.) no ip default-gateway
2.) "ip default-gateway z.z.z.z" where z.z.z.z is the IP of the default gateway for setting again new gateway address

Then for replacing the IP address of the the G450

1.) "interface vlan 1"
2.) no ip address
3.) "ip address x.x.x.x y.y.y.y" (x.x.x.x is the IP, y.y.y.y is the subnet mask)

1.) "copy running-config startup-config"
2.) reset chassis
Reply With Quote