View Single Post
  #1  
Old 08-31-2012, 09:27 AM
jsmith0012 jsmith0012 is offline
Aspiring Member
 
Join Date: Aug 2012
Posts: 1
jsmith0012 has 10 reputation points
Default problems with MGC mac addresses

a customer im working with is having problems with the "macshow" command in the cs1000 media gateway cards recently installed. the macshow command is not showing the mac address that is actually being used. heres the mach show for the 3 MGC's at this sight.

ELAN : 10.99.106.138
TLAN : 10.99.106.38

ELAN : cc:f9:54:ec:2c:67
TLAN : cc:f9:54:ec:2c:68
DB1 : 58:16:26:bd:87:69
DB2 : 58:16:26:bd:ac:96


ELAN : 10.99.106.139
TLAN : 10.99.106.39

ELAN : 80:00:80:00:80:00
TLAN : 80:00:80:00:80:00
DB1 : 3c:b1:5b:49:31:69
DB2 : 3c:b1:5b:48:e9:3a


ELAN : 10.99.106.140
TLAN : 10.99.106.40

ELAN : 80:00:80:00:80:00
TLAN : 80:00:80:00:80:00
DB1 : 58:16:26:bd:db:64
DB2 : 58:16:26:bd:ad:48



however when i ping from the same vlan and show the arp cash this is what i get

10.99.106.138 cc-f9-54-ec-2c-67 dynamic
10.99.106.139 c8-f4-06-86-5a-a0 dynamic
10.99.106.140 c8-f4-06-86-3a-1a dynamic
10.99.106.38 cc-f9-54-ec-2c-68 dynamic
10.99.106.39 c8-f4-06-86-5a-9f dynamic
10.99.106.40 c8-f4-06-86-3a-19 dynamic

witch are the correct mac addresses being used by the system. this is not service affecting but my customer is freaking out since this is a new install. this is a 7.0 CS1000.

any ideas?
Reply With Quote