View Single Post
Old 09-08-2014, 11:15 PM
sunilkumarv sunilkumarv is offline
Join Date: Mar 2010
Location: India
Posts: 124
sunilkumarv has 24 reputation pointssunilkumarv has 24 reputation points


here is the procedure

In the 46xxsettings.txt file under the “EVENT LOGGING SETTINGS”

· SET LOGSRVR X.X.X.X (Where X.X.X.X is the IP address of the Syslog Server/PC you already setup with syslog server application. Make sure that the syslog server and phones are reachable in the Network)
· On the settings file, SET LOGLOCAL 8 (For debug level).

For 46xx, 96xx, 16xx and 96x1-H323 phones:
Enter MUTE CRAFT #. Scroll down to Debug and set it ON. Also scroll down to Log and set it to Debug.
· Reboot the phones to pickup the new settings file.
· Make sure that the Syslog Server is up and running at this time to capture any event on the phones
· Do the test to reproduce problem
Reply With Quote