Numbering plan identification on Called party number, IPO 500

[btaran]

Hello.

I have IPO 500v2, 7.0(36) with E1 pri.
I need to set Numbering plan identification (in Called party number) to ISDN/telephony numbering plan (Recommendation E.164). How i can do it?

In Calling party number it's checkbox "Force Number Plan to ISDN"

Trace:

10/09/13  12:03:44  Trace DSS1 (Q.931) created by Linkbit AT1000 7.31.61006
 *********************  Rx1  TS 01  CALL  CR=  3  2155000->2132264  12:40:57-12:41:16
12:40:57.395           Rx1         SETUP                 (2155000->2132264)
   00 01 12 1C 08 02 00 03 05 04 03 80 90 A3 6C 09 21 80 32 31 35 35 30 30 30 70 08 80 32 31 33 32
   32 36 34 A1
   LAYER 2
   DSS1
       04  08 00001000 Protocol discriminator.......... Recommendation Q.931/I.451 user-network call control messages (8)
     -- Call reference
     -- Message type
     -- Bearer capability
     -- Calling party number
       14  6C 01101100 Information Element Identifier.. Calling party number IEI (108)
       15  09 00001001 Length indicator................ 9
       16  21 0....... Extension indicator............. 0 (information continues in the next octet)
              .010.... Type of number.................. 2 (National number type)
              ....0001 Numbering plan identification... 1 (ISDN/telephony numbering plan)
       17  80 1....... Extension indicator 2........... 1 (last octet)
              .00..... Presentation indicator.......... 0 (Presentation allowed)
              ...000.. spare........................... 0
              ......00 Screening indicator............. 0 (User-provided not screened)
      [18-24] -------- Number digits................... 7 Chars: "2155000"
     -- Called party number
       25  70 01110000 Information Element Identifier.. Called party number IEI (112)
       26  08 00001000 Length indicator................ 8
       27  80 1....... Extension indicator............. 1 (last octet)
              .000.... Type of number.................. 0 (Unknown number type)
              ....0000 Numbering plan identification... 0 (Unknown)
      [28-34] -------- Number digits................... 7 Chars: "2132264"
     -- Sending complete
12:40:57.417    22 ms  Tx1  TS 01  CALL PROCEEDING     
12:40:57.517   100 ms  Tx1  TS 01  ALERTING            
12:41:05.981  8464 ms  Tx1  TS 01  CONNECT             
12:41:16.515 10534 ms  Tx1  TS 01  NOTIFY              
12:41:16.565    50 ms  Tx1  TS 01  DISCONNECT            (Cause=16 : Normal call clearing)
12:41:16.567     2 ms  Rx1  TS 01  RELEASE             
12:41:16.584    17 ms  Tx1  TS 01  RELEASE COMPLETE    
10/09/13  12:42:29  Trace stopped

ps. sorry for bad language.

[mccar61]

International calls failing

Same basic question.
International Calls won't go through on my new IP500 V2 8.1 with PRI
My ISP says that the Numbering Plan (NP) is coming out as "unknown" but they need it to come out as ISDN Telephony E.164. Noone seems to know how to make that happen.

Any help appreciated.
Pat.

[btaran]

Maybe we will do it on R9?

Please, help.

[btaran]

My Avaya's Partner told me: "IPO don't known parameter, like "Numbering plan identification in Called party number"."

Mission impossible, thx.