Avaya Support Forums  

Go Back   Avaya Support Forums > IP Office Contact Center

Thread Tools Search this Thread Display Modes
Old 05-24-2017, 10:24 AM
nfanto nfanto is offline
Join Date: Jan 2015
Posts: 7
nfanto has 10 reputation points
Default How to change the called Adress - IPOCC


My customer need to identify the External Number using for contact her.
For the call flow and routing ICR, that is OK, that works good.

But we need this information in the agent call (in the physical or softphone call), because the customer's agenda use the TAPI driver to collect the Caller ID (That ok) and the Called ID for open the good agenda.

IPOCC + IPO 500v2 in 9.1.8


Last edited by nfanto; 05-24-2017 at 10:26 AM.
Reply With Quote
Old 06-10-2017, 03:35 AM
johns1224 johns1224 is offline
Join Date: Apr 2017
Posts: 56
johns1224 has 9 reputation points

Hi there, nfanto. Did you ever find a resolution to this issue?
Reply With Quote
Old 06-12-2017, 02:37 AM
kruegerb kruegerb is offline
Join Date: Oct 2013
Location: Stuttgart-Germany
Posts: 276
kruegerb has 12 reputation points

Normally at desk phone the caller ID and the topic name is displayed. If caller ID configured in IPOCC as customer, the caller name and topic name is displayed.
On softphone when caller reached agent directly only the caller ID is shown, in case distributed via waiting queue, caller ID and topic name is displayed.

When I understand the requirement correctly, the topic number should be shown instead of topic name. This is a new requirement. Not to solve by configuration in actual Release. From technical point of view it is possible in future, it would be a minor change in the IPOTaskserver software and it must be configurable in the system, because most customers want to see the topic name.
Create a Grip to make the requirement official.

Last edited by kruegerb; 06-12-2017 at 03:51 AM.
Reply With Quote
Old 06-20-2017, 06:20 AM
nfanto nfanto is offline
Join Date: Jan 2015
Posts: 7
nfanto has 10 reputation points


Thank you for your answer.

You're right i have the topic name on the UI agent, but that is on Avaya software.
I use the TAPI for a third party application.

In fact, i need to put an information in the TAPI (the TAPI application is install on all agent cumputer). This information is a unique info for each topic.

You have any info about the field i can use?

johns1224, No i have not found a solution, if i found something i update the case.
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -7. The time now is 04:31 AM.

This Forum is provided solely for the use and convenience of Avaya customers and partners. Use of the Forum is subject to the Terms and Use and Privacy Statement found at www.avaya.com. No other use is permitted. The Forum including all content posted is “AS IS” and Avaya expressly disclaims all warranties and/or guarantees as to its accuracy, reliability, usefulness, quality or non-infringement of intellectual property. Avaya reserves the right to remove any content posted on the Forum at any time and for whatever reason.

Avaya will not be liable for any content posted on this Forum, including, without limitation, any errors or omissions or for any losses or damages of any kind incurred as a result of use or reliance on any content, regardless of its origin.

You expressly understand and agree that you assume all risks associated with use or reliance on this content.