Avaya Support Forums  

Go Back   Avaya Support Forums > Avaya Aura & Unified Communications

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 03-27-2011, 08:33 AM
rgrasz rgrasz is offline
Hot Shot
 
Join Date: Mar 2011
Posts: 10
rgrasz has 10 reputation points
Default Aura SP MBT 5.2.1 NIC bonding

Hello
How to configure NIC bonding for redundancy from eth0 ?
I've found that eth5 can be redundant to eth0 but question is how to configure that?
My servers S8800 - HP DL360 G7.

Is it also possible on 2 S8800 with HA configured?
Reply With Quote
  #2  
Old 04-05-2011, 03:27 AM
ahmed1 ahmed1 is offline
Hot Shot
.
 
Join Date: Nov 2010
Posts: 17
ahmed1 has 10 reputation points
Default NIC Bonding for SP MBT

Hi rgrasz,

Open the System Platform Webconsole --> Server Management --> Network Configuration page.

Under Bonding Interface, Create a NIC Bond (Bond0) with

Mode: Active/Backup,
Slave 1 / Primary: eth0 and
Slave 2 / Secondary: eth5

Scroll down to "Domain Network Interface" and change Domain0's "avpublic" from eth0 to Bond0. Save the changes by clicking on Save button.

Yes, NIC bonding is supported on S8800 servers and HP servers.

For HA configuration, the proper method is to have Eth0 connected to SW-A and Eth-2 connected to Sw-B for both servers.

Regards,

Sabir.
Reply With Quote
  #3  
Old 04-05-2011, 11:44 AM
rgrasz rgrasz is offline
Hot Shot
 
Join Date: Mar 2011
Posts: 10
rgrasz has 10 reputation points
Default

Hi Ahmed
Thanks for response, but under Network configuration i cannot see anything about Bonding interface....
I have eth0 and eth1 thats all.
I cannot create Bond interface etc etc.
I have MBT installed maybe this is problem..
Regards
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 12:06 PM.

This Forum is provided solely for the use and convenience of Avaya customers and partners. Use of the Forum is subject to the Terms and Use and Privacy Statement found at www.avaya.com. No other use is permitted. The Forum including all content posted is “AS IS” and Avaya expressly disclaims all warranties and/or guarantees as to its accuracy, reliability, usefulness, quality or non-infringement of intellectual property. Avaya reserves the right to remove any content posted on the Forum at any time and for whatever reason.

Avaya will not be liable for any content posted on this Forum, including, without limitation, any errors or omissions or for any losses or damages of any kind incurred as a result of use or reliance on any content, regardless of its origin.

You expressly understand and agree that you assume all risks associated with use or reliance on this content.