9620 phones getting into discover mode

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • sharma13
    Member
    • May 2010
    • 3

    9620 phones getting into discover mode

    Hi friends !!
    Am stuck here with a strange problem. My 9620 phones get into discover mode if i log them out. This is happening on a new site of mine which is connected to main site running 8730 in duplex CM 5.2.1 over the LAN. Phones are working perfectly fine when logged in. Only when i log out this problem occurs. Iam using the fw 3.1 on these phones.Find below some more clarity on the scenario:
    DHCP string contains only the ip address of the HTTP/httpss server from where the phone picks up 46xx settings file. In the file itself i've given the MCIPADD=x.x.x.x, y,y,y,y where x=main server clan and y=LSP. I've got 6 CLAN's which are working perfectly fine in load balancing mode.
    But the moment i logout a phone, it goes into discover mode within 30-40 secs discovering forst the x ip-address and then the y ip-address.Comes up again asking for login in another 30-40 secs and if no login is given again goes into discover. It keeps on doing this over and again.
    I need to close this issue. Also iam not able to implement QKLOGINSTAT featue from 46xx file onto these phones. Iam using a value of 1 which means manual login each time but the phone still automatically logs in when restarted.
  • ekalia
    Member
    .
    • May 2010
    • 9

    #2
    9620 Issue

    Hi,

    Could you please try this in the 46xxsettings file:

    Change the 'SET UNNAMEDSTAT' to '0' in 46xx settings file under h.323 settings to disable the parameter and test the same.
    Please see the below screen shot:

    ################################################## ##########
    ## ##
    ## H.323 SETTINGS ##
    ## Settings specific to telephones with H.323 software ##
    ## ##
    ################################################## ##########
    ## Unnamed Registration Status
    ## Specifies whether unnamed registration is initiated if
    ## a user fails to enter a value at the Extension prompt.
    ## Unnamed registration provides the telephone with
    ## TTI-level service, enabling a user, for example, to
    ## dial emergency services such as 911.
    ## SET UNNAMEDSTAT 0


    In case this does not resolve the issue, I would suggest that you either create an online Service Request at http://support.avaya.com/ >> "Create Service Request", or call into the support center to ask this technical question.

    Thanks,

    Esha Kalia

    Comment

    • sharma13
      Member
      • May 2010
      • 3

      #3
      Hi Esha

      Thanks a ton .... changing this made my phones stuck at logout screen and didnt go to discover mode !!!!

      Thanks again for your wonderful inputs

      Comment

      Loading