![]() ![]() |
#1
|
|||
|
|||
![]()
I'm pretty new to SIP and trying to get a SIP phone set up as an endpoint to our CM via session manager 7. The phone is a polycom VVX. I believe i've configured everything correctly, i've been going by the following article: https://www.devconnectprogram.com/fi...6-e59382467d6b
However, no matter how many things I change around in the phone, all I get are blank messages when using traceSM such as the following. There are no details inside of the messages. Any ideas? 15:36:44.467 |---------->| | | (T27) 15:38:09.976 |---------->| | | (T28) 15:39:18.975 |---------->| | | (T30) 15:40:28.975 |---------->| | | (T32) 15:41:34.975 |---------->| | | (T33) 15:42:55.975 |---------->| | | (T35) 15:44:21.974 |---------->| | | (T36) |
#2
|
|||
|
|||
![]()
It appears that no matter what changes I made the phone would not reflect them. I ended up resetting the phone to default values and started over. I am now seeing an attempt to register.
|
#3
|
|||
|
|||
![]()
It appears that no matter what changes I made the phone would not reflect them. I ended up resetting the phone to default values and started over. I am now seeing an attempt to register.
|
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|