Hi
Trying to get Equinox apps to work.
Equipment and Lics
IP Office V2 Ver 11, with VMPro and Gamma sip trunks.
Power Users
Using a Draytek router with ports 5061 and 46750 - 50750 to the IPO, disable Sip Alg aswell and I have setup a stun server aswell on the IPO.
Created a self sign cert and applied to laptop and to mobile device.
The apps register fine with green tick, but when I make a call there is no speech, same goes when I ring *17 for voicemail, it connects to the VM box but you hear nothing.
Only using equinox from an external connection, the customer has a separate network for Data.
Problem looks to be with the RTP ports but I am at a loss now as these ports are forwarded with the NAT rules in the Draytek 2862 router.
Trying to get Equinox apps to work.
Equipment and Lics
IP Office V2 Ver 11, with VMPro and Gamma sip trunks.
Power Users
Using a Draytek router with ports 5061 and 46750 - 50750 to the IPO, disable Sip Alg aswell and I have setup a stun server aswell on the IPO.
Created a self sign cert and applied to laptop and to mobile device.
The apps register fine with green tick, but when I make a call there is no speech, same goes when I ring *17 for voicemail, it connects to the VM box but you hear nothing.
Only using equinox from an external connection, the customer has a separate network for Data.
Problem looks to be with the RTP ports but I am at a loss now as these ports are forwarded with the NAT rules in the Draytek 2862 router.
Comment