![]() ![]() |
#1
|
|||
|
|||
![]()
Hi,
Are there any known issues around linux clock time increasing like leap issues in R18.0.0.1 cms and linux version 2.6.32-573.12.1.el6.x86_64?Its an HA system and only one server has this issue.There is no NTP either. I see R17 did have a psn for the same .Has it been fixed in R18.0.0.1 The linux clock on our cms keep increasing.is this a possibility of leap seconds ?Or anythigng to do with DST. the hwclock shows correct time ,per the timezone set in /env/sysconfig/clock file. I would like to know what other possibility could cause the offset to increase? |
#2
|
|||
|
|||
![]()
Hi,
I am not aware of any such known issues. Since it is also working fine on other CMS, issue could be specific to this hardware. I will suggest to open SR with Avaya support team to look further into it. I hope it helps. |
#3
|
|||
|
|||
![]()
Thank you for the response Shaikh
Further,i noticed that the hwclock is drifting. Can this be adjusted periodically.is changing hwclock service affecting? |
#4
|
|||
|
|||
![]()
Hi,
Yes, you can do it manually. It is not service affecting. |
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|