AdminStatus down on MLT on 5530

[rsween]

We have a 5530 with several MLT's on it, but one is different from the rest.
Port 1/23 has its AdminStatus enabled.
Port 2/23 has its AdminStatus disabled.

All of the other MLT's have AdminStatus enabled on both ports.
What would happen if I enabled AdminStatus on port 2/23?

Thanks in advance.

[mneumann]

If your MLT aggregate 1/23 + 2/23 an you enable the disabled port your MLT will act as full redundant MLT with two active ports

Pls check the status before you enable that disabled port with:

# show mlt

[good luck}