HI, I am setting up 4 AMS Clusters.
First Cluster went OK
but had issue getting the SIG/GRP and Media server in CM to link to M11 and M12.
Node-Name were pointing to individual IP of each servers. Example
Host1-M11 172.26.102.61
Host2-M12 172.26.102.62
But looking at log in AMS found out that CM was initiating a connection to M11 on 172.26.102.61 but the M11 was answering back to CM with 172.26.102.60 (Virtual IP for Active sever in the Cluster)
So i was able to make modify the Node-N to the following
Host1-M11 172.26.102.60
Host2-M12 172.26.102.60
then was able to re-create the Sig group 71 nd 72 with these node name.
that did the trick and Cluster 1 went up.
Now time to setup Cluster 2
but this time the CM does not let me use 2 different Node-N with same IP.
Sig 73 for Media 13 is ok its with Host2-M13 172.26.102.64 (virtual IP)
but adding sig 74 with Host2-M14 172.26.102.64 give me now the following when i press F3 AMS Node-Name Ip address already in use
Documentation does not say much about to set up Cluster
Anyone have setup AMS Multi-Cluster?
your help is welcome
First Cluster went OK
but had issue getting the SIG/GRP and Media server in CM to link to M11 and M12.
Node-Name were pointing to individual IP of each servers. Example
Host1-M11 172.26.102.61
Host2-M12 172.26.102.62
But looking at log in AMS found out that CM was initiating a connection to M11 on 172.26.102.61 but the M11 was answering back to CM with 172.26.102.60 (Virtual IP for Active sever in the Cluster)
So i was able to make modify the Node-N to the following
Host1-M11 172.26.102.60
Host2-M12 172.26.102.60
then was able to re-create the Sig group 71 nd 72 with these node name.
that did the trick and Cluster 1 went up.
Now time to setup Cluster 2
but this time the CM does not let me use 2 different Node-N with same IP.
Sig 73 for Media 13 is ok its with Host2-M13 172.26.102.64 (virtual IP)
but adding sig 74 with Host2-M14 172.26.102.64 give me now the following when i press F3 AMS Node-Name Ip address already in use
Documentation does not say much about to set up Cluster
Anyone have setup AMS Multi-Cluster?
your help is welcome