Avaya Support Forums  

Go Back   Avaya Support Forums > Avaya Networking Products

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 11-17-2022, 09:01 PM
hayashi3 hayashi3 is offline
Aspiring Member
 
Join Date: Nov 2022
Location: japan
Posts: 1
hayashi3 has 10 reputation points
Unhappy ERS3549GTS VLAN settings

I have a question about VLAN setting of ERS3549GTS.
I couldn't figure it out by looking at the CLI reference.

Q1.vlan port [port number] pvid [vid]
・"pvid = Port VLAN ID (native vlan)"
Is my understanding correct?

・Assuming that the following settings are reflected.
"vlan members 100 1", "vlan port 1 pvid 10"

Then, which port communicates with VLAN-ID 1 or 10?
below, Is my understanding correct?
untag VLAN-ID 1: OK
untag VLAN-ID 10: OK
Tag VLAN-ID 1&10: NG

Q2.
Suppose you have reflected the following settings:
"vlan ports X tagging untagPvidOnly"
"vlan members X add 10,20,30,40"

At this time, since pvid is not set, will pvid be 1?
To begin with, I don't understand the difference between "tagALL" and "untagPvidOnly".

Q3. vlan ports [port number] tagging tagAll filter-untagged-frame enable
I don't understand the intent of this command.

What is the best method in writing call data to the AES to be used in CTI in Orchestration Designer
I have variables that get collected in OD and when I transfer the call to an agent I want to pass those along with the call so the CTI will use them.

Any single answer is welcome.

Last edited by hayashi3; 11-23-2022 at 06:17 PM. Reason: typo
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 02:11 AM.

This Forum is provided solely for the use and convenience of Avaya customers and partners. Use of the Forum is subject to the Terms and Use and Privacy Statement found at www.avaya.com. No other use is permitted. The Forum including all content posted is “AS IS” and Avaya expressly disclaims all warranties and/or guarantees as to its accuracy, reliability, usefulness, quality or non-infringement of intellectual property. Avaya reserves the right to remove any content posted on the Forum at any time and for whatever reason.

Avaya will not be liable for any content posted on this Forum, including, without limitation, any errors or omissions or for any losses or damages of any kind incurred as a result of use or reliance on any content, regardless of its origin.

You expressly understand and agree that you assume all risks associated with use or reliance on this content.