CS1K 7.6/Output to the PMSI Port is different with MGC's compared to SSC

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • smaiyaur
    Guru
    .
    • Nov 2013
    • 107

    CS1K 7.6/Output to the PMSI Port is different with MGC's compared to SSC

    Output to the PMSI Port is different with MGC's compared to SSC

    The different Output seen on the PMSI Port with MGC's Rls 7.6 compared to SSC Rls 3

    solution :Customer used a BGD terminal to PRint OPtions and found differences in the two switches. They changed the new software configuration to match the old and the problem was resolved .
    We changed the BGD port options from 02 PORT 2 WA: SE ** ** ME: SE ** ** OP: SE ** ** ST: SE ** ** to 02 PORT 2 WA: SE PR DI ME: SE PR DI OP: SE ** ** ST: SE ** DI This fixed the problem
Loading