![]() ![]() |
|
![]() |
|
Thread Tools | Search this Thread | Display Modes |
#1
|
|||
|
|||
![]()
Hello!
I try to configure LSP (CM,BSM and utility server) like description ont Avaya Documents. H.323 phones ang G430 gateway work good (re registration on the LSP CM, if I disconnect server with main CM). But BSM do not connecte to LSP CM. Session Manager Entity Link Connection status show "avaya-lsp-fs" DOWN - "500 Server internal error, Destination Unreachible". In the traceSM I see OPTION message from BSM to LSP CM and no any response. What I try to configure BSM link: Make BSM SIP entity. In the SM->Branch session manager, add BSM. Add Entity link from BSM to Main CM I attach screenshots Thanks! |
#2
|
|||
|
|||
![]()
Hello.
I read documentation and see: I must add BSM to nodes-name But I do not found where it is use (signaling-group). Now I add signaling-group 2, where I use BSM as the far end. I change signaling group in the SIP trunk, from1 to 2 only in the LSP CM. And it is work. But if I use save translation all command, I get old situation. Where and how I must use BSM node-name? Thanks! |
#3
|
|||
|
|||
![]()
BSM node-name need not be added on CM. Main SM's IP address will be automatically replaced with BSM asset IP when LSP/ BSM is active.
|
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|