How to tag LLDP packets

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • pately
    Aspiring Member
    • Sep 2012
    • 1

    How to tag LLDP packets

    Hello

    I am using 9600 phones with Juniper 4200 switches, I use LLDP with voip option on juniper to get the phone to join the voice vlan.

    All works fine but when I look at layer 2 switching table on the switch I see phones MAC appear in both Data & Voice vlan, the reason this is happening according to Juniper is because after joining the voice vlan the phone keeps sending untagged LLDP packets, all untagged packets on a port drop to Data vlan hence that vlan updates switching table with MAC of that phone.

    I have looked at the sniffer capture and can see LLDP as untagged but all other traffic is tagged to the voice vlan as I am using L2Q = 1 in the phone DHCP options.

    Does anyone know if this is a known issue with Avaya phones or how to fix it??? I have tried firmware 3.10 & 3.11 for 9640.
  • jppicard
    Aspiring Member
    .
    • Feb 2010
    • 2

    #2
    hi
    Given lldp traffic is encapsulated inside LLC frames; then it will not be tagged .
    In short; it works as design and you ll always see what you observed unless lldp is disabled
    cheers;jpp

    Comment

    Loading