Avaya Support Forums  

Go Back   Avaya Support Forums > IP Telephony and Convergence

Thread Tools Search this Thread Display Modes
Old 06-11-2014, 09:52 AM
cgearhart1 cgearhart1 is offline
Join Date: Jul 2013
Posts: 6
cgearhart1 has 10 reputation points
Default Call Routing Getting Hung up on TOD Step in Vector

We are currently on CM 3.1.4 and have the basic call center. New VDN / Vectors have been programmed for a few groups and the calls are getting up on on the TOD step in the vector and are sending them to after hours calls. I can't figure this out because all of our other vectors are built the same way with TOD steps and they work just fine.

Here is the trace I did on that vector (150) and the results:

11:38:48 0 0 ENTERING TRACE cid 6577
11:38:48 150 1 vdn e6148 bsr appl 0 strategy 1st-found override y
11:38:48 150 1 wait-time
11:38:50 150 2 goto
11:38:50 150 3 goto
11:38:50 150 3 time-of-day(4,11:38)+VDNTZO(00:00)+DSR(00:00)=4,11:38
11:38:50 150 19 goto
11:38:50 150 19 TRACE COMPLETE cid 6577

Does anyone have any ideas? Any help would be appreciated.

Christi Gearhart
Reply With Quote
Old 06-17-2014, 07:01 AM
tripathi1 tripathi1 is offline
Hot Shot
Join Date: Jun 2014
Posts: 10
tripathi1 has 10 reputation points
Default Call Routing Getting Hung up on TOD Step in Vector

Hi Christi,

I would suggest you to open a service request with Avaya to investigate further on this issue.

We might have to enable MST traces to investigate further on this.
Hope this helps


Anuj Tripathi
Reply With Quote
Old 06-25-2014, 08:31 AM
richa164 richa164 is offline
Join Date: Oct 2013
Posts: 131
richa164 has 23 reputation pointsricha164 has 23 reputation points

It could well be a simple matter of corruption in the vector have you tried removing the logic and simply re-creating followed by a reset sys 4???
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -7. The time now is 07:37 PM.

This Forum is provided solely for the use and convenience of Avaya customers and partners. Use of the Forum is subject to the Terms and Use and Privacy Statement found at www.avaya.com. No other use is permitted. The Forum including all content posted is “AS IS” and Avaya expressly disclaims all warranties and/or guarantees as to its accuracy, reliability, usefulness, quality or non-infringement of intellectual property. Avaya reserves the right to remove any content posted on the Forum at any time and for whatever reason.

Avaya will not be liable for any content posted on this Forum, including, without limitation, any errors or omissions or for any losses or damages of any kind incurred as a result of use or reliance on any content, regardless of its origin.

You expressly understand and agree that you assume all risks associated with use or reliance on this content.