ASAI parameter administration

Use the Parameter Administration menu option to administer:

• Connect Event reporting to the A_Event variable in an application assigned to an ACD, VDN, or CTL domain
• Details displayed with the trace dip7 command to monitor messages and events processed by the ASAI feature

Administering Connect Event reporting

To set ASAI parameters regarding connect event reporting and the level of trace detail:

1. Start at the ASAI Administration menu and select Parameter Administration:



The system displays the ASAI Parameters window.



2. Enter either Connected or Alerting in the CONNECT Event field to specify when the Connect event is reported to the A_Event action in a script assigned to an ACD, VDN, or CTL type domain. Or, you may press F2 (Choices) to select from a menu. The default is Connected.
3. Enter Low, Normal, or High in the Trace Detail field to specify the amount of trace detail to display. Or, you may press F2 (Choices) to select from a menu. The following table summarizes the trace command settings and the level of detail achieved with each one:

Setting	Display
Low	Information displayed about ASAI error and warning conditions
Normal	All information displayed by the Low setting, plus ASAI script action (that is, A_Callinfo, A_Tran, A_Event, and A_RouteSel)
High	All information displayed by the Low and Normal settings, plus call event descriptions received from the PBX

4. Enter the IP address or host name of the MAPD in the IP Address field.
5. Enter the Node ID of the Avaya IR system as administered on the MAPD in the Node ID field. This field contain the value from signal01 to signal08.
6. Press F3 (Save).

The system displays the level of trace detail specified.

7. Press F6 (Cancel) repeatedly to return to the ASAI Administration menu.

See also

• trace command

� 2002 Avaya Inc. All Rights Reserved.