Hardware requirements

If you purchased only the Avaya IR system software, the following hardware is required.

Sun Blade 150 platform

The hardware platform for the Avaya IR system is a Sun Blade 150 with the following features:

• Solaris 8 Update
• 650-MHz UltraSPARC-IIi processor
• 256-KB Ecache
• 512 MB memory
• One 40 gigabyte hard drive with ATA66 interface
• 1.44-MB diskette drive
• CD-ROM drive
• Three PCI connectors
• ATI Rage XL on-board graphics, 8 Mbyte RAM
• One serial port
• One parallel port
• 10/100 Ethernet network interface card (NIC)
• Two IEEE 1394 ports (Firewire)
• Four USB ports (two are required for keyboard and mouse)
• Country Kit with power cord, keyboard, and mouse

Telephony cards

Telephony cards provide the telephony interface to the system. The telephony card required for the Avaya IR system is the Natural Microsystems (NMS) AG 4000/1600. The Sun Blade 150 platform can have a maximum of two telephony cards.

External modem

A modem is required for remote maintenance and administration functions. The recommended modem is an external U.S. Robotics Sportster 33.6 kB faxmodem.

Modem cable

An RS-232 cable is required to connect the external modem to the serial port of the Sun Blade 150.

� 2003 Avaya Inc. All Rights Reserved.