Digital protocol - Wink Start feature

Type of feature

When you use the Wink Start digital protocol with ports on an Avaya IR, you must have RTU licenses to for each port that uses the protocol.

Overview

T1 Wink Start is a trunking arrangement where either side can initiate actions. It is a common and reliable connection between switches and networks, computer telephony systems, or other switches. After a connection is established with a distant system for an outgoing call, the system waits for a momentary signal (wink) before sending the digits of the called number. Similarly, on an incoming call, the system sends the wink signal when ready to receive digits.

Hardware requirements

At least one digital telephony card must be installed and operational.

Software requirements

The Wink Start digital protocol feature requires the NMS package (AVnms) software.

Application development considerations

The following considerations apply to application development for Wink Start:

• For TAS, the tic instruction is used for basic control of incoming and outgoing calls on T1 and E1 lines.
• For IRAPI, the irCall() , irAnswer() , irDial() , and irDisconnect() functions provide the basic call control capabilities for T1 interfaces with IRAPI.

Using this feature

Administer the Wink Start digital protocol feature using the Digital Interfaces screen in Web Administration.

� 2003 Avaya Inc. All Rights Reserved.