Assign Card

To assign a VoIP card:

1. From Web Administration, go to the Assign VoIP Card screen (Configuration Management > Switch Interfaces > Voice over IP > Assign Card).
2. Complete the common fields for VoIP.

   See Assign VoIP card screen for guidelines on completing these fields.

3. If you are using the H.323 trunk protocol, complete the trunk fields.

   If you make changes or add trunk connections here, you must make corresponding entries on the DEFINITY or MultiVantage system. See Assign VoIP card screen for guidelines on completing these fields.

4. Click Submit.

   The system displays a message advising you that you must stop and start the voice system for the changes to take effect.

5. If you are using the H.323 station protocol, go to the Assign phone number to channel screen and assign numbers to the VoIP channels.
6. Stop and start the voice system at the appropriate time.

Caution:
Stopping the voice system ends call processing. Stop the system when no calls or few calls are coming in. If possible, reroute calls to another Avaya IR system.

� 2003 Avaya Inc. All Rights Reserved.