Change Parameters

To change VoIP parameters:

1. From Web Administration, go to the Change VoIP Parameters screen (Configuration Management > Switch Interfaces > Voice over IP > Change Parameters).
2. Select the card you want from the drop-down list and click Submit.

   The system displays the fields containing the parameters for the selected card.

3. Make entries in any VoIP fields that you need to change.

   See Change VoIP parameters screen for guidelines on completing these fields.

   If you make changes or add trunk connections here, you must make corresponding entries on the DEFINITY or MultiVantage system.

   If you are using the H.323 station protocol and you make changes to phone numbers for VoIP channes, go to the Assign phone number to channel screen and re-assign numbers to the VoIP channels.

4. Click Submit.

   The system displays a message advising you that you must stop and start the voice system for the changes to take effect.

5. Stop and start the voice system at the appropriate time.

Caution:
Stopping the voice system ends call processing. Stop the system when no calls or few calls are coming in. If possible, reroute calls to another Avaya IR system.

� 2003 Avaya Inc. All Rights Reserved.