Avaya INTUITY AUDIX LX
Home Getting StartedAdministrationMaintenanceReference

Search This CD

Index

Contact Us
 

 

 

   
Home > Getting Started > Installation >Install IA 770 INTUITY AUDIX Software

Install IA 770 INTUITY AUDIX Software

This section includes steps for the following processes:

Run the Autoinstall Program for IA 770 INTUITY AUDIX Software

  1. Log in to the Communication Manager server from Your Laptop.

Note: The craft password is the normal maintenance password because you installed a new authentication file.
  1. At the Linux prompt, type stop -ac and press Enter.

The system prompts you to confirm you want to stop the software.

  1. Confirm that you want to stop the software.

The system begins to stop the Communication Manager software. Stopping can take a few minutes.

Note: You can check the status of the system stopping by typing statapp -c at the prompt and pressing Enter. Once the processes have stopped, you must type CTRL + C to stop the statapp command.
  1. At the Linux command prompt, type cd /usr/CHIA/ and press Enter.
  2. Type sudo ./autoinstall and press Enter.

The system begins to install the software. The system returns messages on the screen as the software is installed.

craft@crater> /opt/messaging/sbin/autoinstall
/releases/0208.1/CHIA-1.0-6.7/autoinstall


***********************************************************
* Start autoinstall: Fri Aug 9 13:38:47 MDT 2002 *
***********************************************************


...

134307 - begin installing us-tdd.
134328 - installation succeeded us-tdd.

134328 - begin installing french-c.
134350 - installation succeeded french-c.

134351 - begin installing lat-span.
134408 - installation succeeded lat-span.

134408 Installation Complete


The following packages were successfully installed:
audixcd websrv mom mtce vs maint prismlog machlog cdhstub swinbase swtt
s asp perf cswebadm webvoice chiaweb TSM teladm chantran tscrtu chia CHIAset swm
gmt POET61-POETRuntimeSystem POET61-POETTools VM-dfltdb VM-sw ldapolv3 e
mf-tts APPLset us-eng us-tdd french-c lat-span

134409 Saving old installation log

134409 Moving autoinstall logs to Software Management Logs
Moving logs in /var/log/autoinstall to /swmgmt/logs

When complete, the system responds that the installation is successful. If you get a failure notice, contact your service representative.

Enable Messaging

Note: You cannot enable messaging unless the license file with INTUITY AUDIX permssions has been installed.
  1. If necessary, open a browser on your laptop (for example, Internet Explorer 6.0 Service Pack 1), and enter the URL http://192.11.13.6 to log in to the Communication Manager server browser interface as craft.

    Note: The craft password is the normal maintenance password because you installed a new authentication file.

    The system displays the Maintenance Web Pages main menu.
  2. From the Communication Manager server main menu, click Enable/Disable Messaging Software.

The Communication Manager server displays the Enable Messaging window.

  1. Click the Enable button.

The Communication Manager server starts the IA 770 INTUITY AUDIX messaging software.

  1. Click the Back button on your browser.

The Messaging Administration option appears in the Maintenance Web Pages main menu.

Note: You may need to refresh your screen to display the Messaging Administration option. To refresh your screen, select View from the browser's menu bar, then Refresh.

Restart the Communication Manager Software and Check That the Messaging Software is Running

  1. If necessary, log in to the Communication Manager server from your laptop.
  2. At the Linux prompt,type start -ac and press Enter.

The system starts the Communication Manager software.

  1. At the Linux command prompt, type systat and press Enter.

The system displays a list of processes. The complete system startup can take up to 15 minutes.

Note: You can check the status of the system stopping by typing statapp -c at the prompt and pressing Enter. Once the processes have stopped, you must type CTRL + C to stop the statapp command.
  1. Check the list for Communication Manager. The system should say the software is UP. If not. repeat step 2.
  2. Check the list for AUDIX. The system should list 1/1, which means on AUDIX process out of 1 process is running. If it does not list 1/1, repeat step 2.

Login Administration

Note: If the craft login has already been administered because this is an existing Communication Manager server, you do not need to readminister it. Only the sa and vm logins need to be administered.
  1. Log in to the SAT screen as dadmin.

If dadmin does not exist, you must create a dadmin account that is part of the susers group. If this is the first time you logged in as dadmin, the system prompts you to change the password. Follow the prompts to change the password, if necessary, and give the password to the customer administrator.

  1. At the Communication Manager server SAT command line, type add login <login_name> and press Enter.

    The system displays the Login Administration screen.


  2. Make the following field settings for one of the following logins (craft, sa, and vm), and then press F3 (Enter).

    Field Setting
    Login's Name craft, sa or vm
    Login Type service (for craft login name) or customer (for sa or vm login name)
    Service Level craft (for craft login name) or messaging (for sa or vm login name)
    Shell Access n
    Login's Password Enter the password for the login.
    Renter Login's Password Re-enter the password for the login.
    Password Aging Cycle Length (Days) Enter the number of days after which the specified login will require a password change. Leave this field blank if you do not want password aging.

  3. Leave the defaults in all other fields.
  4. Press Enter (F3) to save the login.
  5. Repeat Steps 1 through 4 so that the three logins (craft, sa and vm) have been created.

Check That All Standard Packages Are Installed

  1. If necessary, open a browser on your laptop (for example, Internet Explorer or Netscape), and enter the URL http://192.11.13.6 to log in to the Communication Manager server browser interface as craft.

    The system displays the Maintenance Web Pages main menu.
  2. Go to the List Messaging Software page.
  3. Check the list to verify that the following packages are listed:
    • audixcd
    • websrv
    • CHIAset
    • swmgmt
    • APPLset
    • french-c
    • lat-span
    • us-eng
    • us-tdd

If Necessary, Install Additional Announcement Sets or Remote Field Updates

Note: This task is necessary only if the customer requests additional languages or remote field updates are required for the IA770 INTUITY AUDIX system.

Note: For more information about RFUs and Additional Announcement Sets, see RFUs and Additional Announcement Sets for IA 770 INTUITY AUDIX Messaging.

Top of page
  Search This CD     Index     Contact Us
� 2002-2008 Avaya Inc. All rights reserved.