This section includes steps for the following processes:
Install the S8300
Use Chapters 1, 2, and 3 of Installation and
Upgrades for the Avaya� G700 Media Gateway controlled by an Avaya� S8300
Media Server or an Avaya� S8700 Media Server, 555-234-100 Issue
2. This document is available at avaya.com/support
or on the Avaya S8300 Media Server and Avaya G700 Media Gateway Library
CD, 555-234-825.
|
NOTE: The S8300 that
supports the IA 770 INTUITY AUDIX messaging is always
a primary controller, never a local spare processor.
|
Tasks that should be completed prior to continuing with the IA 770
INTUITY AUDIX Messaging installation are as follows:
- Check your planning forms for the most recent IA770 INTUITY AUDIX
remote field updates (RFUs). Remote field update packages have the
format A<number>rf+<letter>.rpm
or C<number>rf+<letter>.rpm
(for example, C6037rf+a.rpm). You should download any INTUITY
AUDIX RFUs to your laptop the same way you download MultiVantage software.
The INTUITY AUDIX RFUs are available from the Software Download section
of the http://www.avaya.com/support website on the Internet.
- Create and obtain license and authentication
files. The license file should contain permissions for INTUITY AUDIX
software as well as S8300 capabilities.
- Install hardware (except for the CWY1 board).
- Load and install license and authentication files.
- Load and install most recent S8300 and MultiVantage software. The
S8300 software (the .tar file) also contains INTUITY AUDIX software,
though INTUITY AUDIX software cannot be installed and used unless
the license file contains the right permissions.
- Configure the G700 Media Gateway.
- Load and install most recent G700/P330 firmware.
- Administer MultiVantage Software.
- Add INADS phone numbers and enable alarms.
- Back up the system.
Upload RFUs and Additional Announcement Sets
for IA 770 INTUITY AUDIX Messaging, If Necessary
|
Note: This task
is necessary only if the customer requests additional languages
or IA770 INTUITY AUDIX remote field updates are required.
|
The language packages, also called announcement sets, allow system
users to hear voice prompts and system announcements in other languages.
The system is shipped from the factory with the following language packages
installed:
- US English
- English TDD (for teletype (TTY) machines)
- French Canadian
- Latin Spanish
Use the IA 770 INTUITY AUDIX Languages CD to upload additional announcement
sets. For an IA770 INTUITY AUDIX RFU, the file will be in the directory
to which you downloaded the RFU:
- If necessary, reconnect your laptop to the S8300 services port as
you did for the S8300 installation.
- Open a browser on your laptop (for example, Internet Explorer or
Netscape), and enter the URL http://192.11.13.6 to log
in to the S8300 browser interface as craft.
The system displays the S8300 main menu.
- On the S8300 main menu, click Upload Files to Server (via browser)
under Miscellaneous.
The system displays the Upload Files to Server
window.
- Click the Browse button for the first field.
The S8300 displays the Choose File window, which allows you to select
files from your laptop.
- Click directory names until you find the appropriate
announcement file.
- Repeat steps 4 and 5 for the additional fields if additional languages
are required.
- Repeat steps 4 and 5 for additional fields if an IA770 INTUITY AUDIX
RFU is required. Remote field update packages have the format A<number>rf+<letter>.rpm
or C<number>rf+<letter>.rpm
(for example, C6037rf+a.rpm).
- Click Load File.
When the files are successfully transferred, the system displays the
status screen.
- Check that the Status box displays OK.
Top of page
If you are adding an IA 770 INTUITY AUDIX Messaging Application
to an existing S8300 that was installed under a previous work
order, you should be using the checklist for an 