Previous page Next page

Reliability

Reliability when sending voice bearer over IP

The following are supported with the S8700 Media Server when sending voice bearer over IP:

Duplex Reliability when sending voice bearer over IP

The S8700 Media Server is duplicated. Tone-Clock functionality is provided by the IPSI circuit pack in each PN. As an all-IP solution, only IP-connected port networks are supported.

The duplex-reliability option is the most basic option. A duplex-reliability configuration consists of the following:

See Figure 5, Duplex-reliability configuration when sending voice bearer over IP, for an example of a duplex-reliability configuration when sending voice bearer over IP.

Figure 5: Duplex-reliability configuration when sending voice bearer over IP


Figure notes

Number
Description of Connection
1 & 2
S8700 Media Server pair. One in a active mode and the other on standby.
3
Duplication Links: The Ethernet connection default Ethernet 2 and the fiber link
4
A dedicated Ethernet connection to a laptop. This connection is active only during on-site administration or maintenance and the services interface can link to the standby server through a telnet session.
5
Connection from the servers to the Ethernet switch.
6
Ethernet Switch - A device that provides port multiplication on a LAN by creating more than one network segment. In an IP-Connect environment, the Ethernet switch should support 802.1 ip/Q, VLAN and 10-/100-Mbps.
7
Two UPS units
8
Port Network - An optional configuration of Media Gateways that provides increased port capacity.
9
IPSI - A circuit pack that transports control messages over IP. This IPSI circuit pack is used so the S8700 Media Server can communicate with the PNs.
10
Customer LAN
11
Control Lan Interface (C-LAN) - A circuit pack that provides call control for every IP endpoint that is connected to the media server using an Avaya media gateway.

High reliability when sending voice bearer over IP

The high-reliability configuration option builds on the duplex-reliability option. The high-reliability option duplicates components so that no single point of failure exists in the control network. The high-reliability configuration consists of the following:

See Figure 6, High-reliability when sending voice bearer over IP, for an example of a high-reliability configuration when sending voice bearer over IP.

Figure 6: High-reliability when sending voice bearer over IP


Figure notes

Number
Description of Connection
1 & 2
S8700 Media Server pair. One in a active mode and the other on standby.
3
Duplication Links: The Ethernet connection default Ethernet 2 and the fiber link
4
A dedicated Ethernet connection to a laptop. This connection is active only during on-site administration or maintenance and the services interface can link to the standby server through a telnet session.
5
Connection from the servers to the Ethernet switch.
6
Ethernet Switch - A device that provides port multiplication on a LAN by creating more than one network segment. In an IP-Connect environment, the Ethernet switch should support 802.1 ip/Q, VLAN and 10-/100-Mbps.
7
Two UPS units
8
Port Network - An optional configuration of Media Gateways that provides increased port capacity.
9
IPSI - A circuit pack that transports control messages over IP. This IPSI circuit pack is used so the S8700 Media Server can communicate with the PNs.
10
Customer LAN
11
Control Lan Interface (C-LAN) - A circuit pack that provides call control for every IP endpoint that is connected to the media server using an Avaya media gateway.


Previous page Next page