alarm-relative disable ping

Disables relative alarms for Ping tests on any cell or edge that is assigned this alarm template.

You can control the generation of relative alarms for each measurement variable individually or all measurements collectively.

Syntax

alarm-relative disable ping (all | rtt | loss | inter-arrival-time)

no alarm-relative disable ping

no alarm-relative disable ping (all | rtt | loss | inter-arrival-time)

Arguments

Table 10: alarm-relative disable ping arguments
Argument	Description
all	Disables relative alarms for all Ping measurements: RTT, loss, and inter-arrival-time.
rtt	Disables relative alarms for Ping round trip time (RTT).
loss	Disables relative alarms for Ping loss. The loss threshold is a percentage of packets lost in transit.
inter-arrival-time	Disables relative alarms for Ping inter-arrival-time. Inter arrival time is the time between tests, and can be used to trigger an alarm when a link is down or a set of endpoints becomes isolated.

Prerequisites

Must be in Chatter Alarm Configuration mode. For information on how to access this mode, see Accessing and exiting command modes.

Occurrence

Available for use multiple times in the configuration.

Default

Relative alarms are enabled for all Ping measurements.

Description

Disables relative alarms for Ping tests on any cell or edge that is assigned this alarm template.

You can control the generation of relative alarms for each measurement variable individually or all measurements collectively.

The no command restores the default value of enabled for all Ping measurements or the specified measurement variable.