alarm-relative disable tcp

Disables relative alarms for TCP tests on any cell or edge that is assigned this alarm template.

You can control the generation of relative alarms for each measurement variable individually or all measurements collectively.

Syntax

alarm-relative disable tcp (all | delay | cerror | inter-arrival-time)

no alarm-relative disable tcp

no alarm-relative disable tcp (all | delay | cerror | inter-arrival-time)

Arguments

Table 12: alarm-relative disable tcp arguments
Argument	Description
all	Disables relative alarms for all TCP measurements: delay, cerror, and inter-arrival-time.
delay	Disables relative alarms for TCP delay. Delay is how long (in milliseconds) the connection takes to complete.
cerror	Disables relative alarms for TCP cerror. Cerror is the success or failure of the connection.
inter-arrival-time	Disables relative alarms for TCP inter-arrival-time. Inter arrival time is the time between tests, and can be used to trigger an alarm when a link is down or a set of endpoints becomes isolated.

Prerequisites

Must be in Chatter Alarm Configuration mode. For information on how to access this mode, see Accessing and exiting command modes.

Occurrence

Available for use multiple times in the configuration.

Default

Relative alarms are enabled for all TCP measurements.

Description

Disables relative alarms for TCP tests on any cell or edge that is assigned this alarm template.

You can control the generation of relative alarms for each measurement variable individually or all measurements collectively.

The no command restores the default value of enabled for all TCP measurements or the specified measurement variable.