Defining test thresholds
To define test thresholds for an alarm template:
Access Chatter Alarm Configuration command mode. To access this mode, enter the following commands:
a.
enable
(Privileged mode)
b.
configure terminal
(Configuration mode)
c.
module chatter
(Chatter Configuration mode)
d.
alarm name
<name>
(Chatter Alarm Configuration command mode)
Use the commands in
Table 11
to define thresholds for specific tests.
Table 11: Alarm template: test threshold commands
Command
Purpose
threshold rtp
Defines the alarm thresholds for RTP tests on any zone or edge that is assigned this alarm template. Thresholds can be defined for:
l Delay
l Jitter
l Packet loss
l Inter arrival time
threshold ping
Defines the alarm thresholds for Ping tests on any zone or edge that is assigned this alarm template. Thresholds can be defined for:
l Round trip time (RTT)
l Packet loss
l Inter arrival time
threshold tcp
Defines the alarm thresholds for TCP tests on any zone or edge that is assigned this alarm template. Thresholds can be defined for:
l Delay
l Cerror
l Inter arrival time
threshold traceroute
Defines the alarm thresholds for Traceroute tests on any zone or edge that is assigned this alarm template. Thresholds can be defined for:
l Hop round trip time (RTT)
l Inter arrival time
