show zone command

show zone command

Procedure

To view results for tests between a zone’s subzones:

Access Privileged mode. To access this mode, enter the following command: enable.
At the hostname# prompt, enter the following command:

show zone [name <zone-name>] [test {rtp-delay | rtp-jitter | rtp-loss | rtp-inter-arrival-time | rtp-drops | ping-rtt | ping-loss | ping-inter-arrival-time | ping-drops | tcp-delay | tcp-cerror | tcp-inter-arrival-time | tcp-drops}] [criterion {relative | absolute | median | minimum | maximum}]

If you do not enter any arguments or options, data is displayed for the root zone and RTP delay in terms of the relative thresholds (steady, rising, dropping, stale, or no data).

For more information on this command, see show zone in the CNA Command Reference Guide.

Tip: You can also use the Web interface to enter this command. In the Quick Links panel, click Show Commands. And then, in the Information panel, click Chatter. Use the drop-down list to select show zone and the Options button to enter options for the command.