Add additional TN750C Circuit Packs
Return to Task List
- Install the TN750C into a vacant slot in a carrier.
Any carrier is acceptable since power holdover is not a concern.
- Administer a new data module on the TN750C circuit pack, as described in
DEFINITY Enterprise Communications Server Administrator's Guide.
- Type
change announcements and press
Enter to administer new announcements to that TN750C slot. Fill in the "designated board location" field for the circuit pack's location.
- Record the announcements, as described in
DEFINITY Enterprise Communications Server Administrator's Guide.
- Wait until the announcements copy from voice RAM to the on-board flash memory (the yellow LED on the TN750C starts and then stops flashing). This may take about 10 minutes.
Return to Task List
