 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
DEFINITY Made Easy Tools
Issue 3, December 2001
Install Additional Hardware
Add Packet Bus Support for R10si
You may need to add packet bus support when adding ISDN - BRI or CallVisor ASAI port circuit packs.
Task List: Add Packet Bus Support
- Disable Alarm Origination (Packet Bus Support)
- Save Translations (Packet Bus Support)
- Power Down Cabinet (Packet Bus Support)
- Install Circuit Packs (Packet Bus Support)
- Power Up System (Packet Bus Support)
- Test the Packet Bus and C-LAN Circuit Pack (Packet Bus Support)
- Resolve Alarms (Packet Bus Support)
- Enable Scheduled Maintenance and Alarm Notification (Packet Bus Support)
- Save Translations (Packet Bus Support)
If installing TN570 Expansion Interface circuit packs as part of adding packet bus support, then service is interrupted. Notify the customer in advance as to when the addition will be carried out.
If not installing TN570 circuit packs, then service is not interrupted and you can skip to Install Circuit Packs (Packet Bus Support)
|
|
|
|
|
|
|
|
|
|
| Copyright� 2001 Avaya Inc. |
| Send comments to MadeEasy Development Team |
| Always check at the Made Easy Web site for the most current information. |