 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
DEFINITY Made Easy Tools
Issue 3, December 2001
Install Additional Hardware
Determine the port assignments of the circuit packs to be added. If there are no available port slots in the processor cabinet for the C-LAN circuit pack, place it in an EPN cabinet port slot.
| Caution! | When adding or replacing any hardware, be sure to ground yourself against electrostatic discharge (ESD) by wearing a grounded wrist strap. |
| Note: | The TN799x circuit pack is hot-swappable, so you do not need to power down the carrier to install it. |
Insert the TN799x circuit pack into the port slot identified earlier.
|
|
|
|
|
|
|
|
|
|
| Copyright� 2001 Avaya Inc. |
| Send comments to MadeEasy Development Team |
| Always check at the Made Easy Web site for the most current information. |