DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC

DEFINITY Made Easy Tools
Issue 3, December 2001



Bring the System Online

Power Up DC-Powered System

Return to Task List

  1. At the DC Battery Cabinet (if installed), set the circuit breaker to ON.

  2. At the DC Power Cabinet, set the circuit breakers on the associated rectifiers ON.

    3. This starts the system initialization and test. Some red LEDs may be on but are turned off by other procedures in this section

  3. At the rear of each Power Distribution Unit (if installed), set the circuit breaker to ON.


Note: If the system is high or critical reliability, power-up the Expansion Port Network (EPN) first, then the Processor Port Network (PPN). Always power up the control cabinet last.

Return to Task List

DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC
Copyright� 2001 Avaya Inc.
Send comments to MadeEasy Development Team



Always check at the Made Easy Web site for the most current information.