DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC

DEFINITY Made Easy Tools
Issue 3, December 2001



Downloading Firmware to Port Circuit Packs

Verify Trunk Status (optional)

Return to Task List

This optional procedure for DS1 target boards allows you to see which ports are in service.

  1. Type list configuration board UUCSS and press Enter to identify the ports associated with a particular DS1 board. Note the total number of ports.

  2. Type display port UUCSSpp, where pp is the port number of one of the ports, and press Enter to find the trunk group number.

  3. Type status trunk n, where n is the trunk group number, and press Enter. Note the status of all the ports in service for that particular DS1 board.

  4. If the number of ports in the group does not equal the total number of ports, repeat step 2 for a port number not listed.

    5. For example, if trunk group 6 shows only ports 01 through 15, then display port 17 to identify the trunk group number for the rest of the ports for that particular DS1 board. Note the status of all the ports in service in that trunk group.

Return to Task List

DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC
Copyright� 2001 Avaya Inc.
Send comments to MadeEasy Development Team



Always check at the Made Easy Web site for the most current information.