DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC

DEFINITY Made Easy Tools
Issue 3, December 2001



Downloading Firmware to Port Circuit Packs

Copy image from source board to target board

Return to Task List

This procedure assumes that the firmware image files are resident on the source board (TN799x C-LAN).

Make sure the target boards are working before the download.


Note: If you are scheduling circuit packs used as primary and secondary sync sources (such as TN464GPs), the timing automatically moves to a local sync source when the boards are busied out during the download. The timing automatically moves back to the proper sync sources after the boards are returned to service.

Task List: Copy the firmaware image

  1. Check SPE

  2. If you do not know their locations, Locate Target Boards

  3. Verify Trunk Status (optional)

  4. Verify Files

  5. Schedule Download

  6. Check Specified Resources (scheduled downloads only)

  7. Monitor Download Progress

  8. Disable File System (not necessary when Remove Image File After Successful Download? option is set to default y)

If you need to abort a scheduled firmware download, see Abort a Firmware Download.

DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC
Copyright� 2001 Avaya Inc.
Send comments to MadeEasy Development Team



Always check at the Made Easy Web site for the most current information.