DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC

DEFINITY Made Easy Tools
Issue 3, December 2001



Option Switch Settings

Set 7400D Options

Return to Task List

The following steps are an example of how to change the default setting of 9600 to the custom setting of 19200.


Note: If the link is between a R10r and a CMS, set the 7400D to 19200. If the link is between any other system and a CMS, leave the speed of the 7400D set at 9600.

  1. From the HOME screen, press NEXT/NO until SET OPTIONS ? is displayed.

  2. Press ENTER/YES to stay in the SET OPTIONS ? menu.

  3. Press NEXT/NO until SET 9600 SPEED ? is displayed.

  4. Press ENTER/YES when SET 9600 SPEED ? is displayed.

  5. Press NEXT/NO when 9600 = ON ? is displayed.

  6. Press ENTER/YES when 9600 -> OFF ? is displayed.

  7. Press ENTER/YES when CONTINUE ? is displayed.

  8. Press ENTER/YES when SET 19200 SPEED ? is displayed.

  9. Press NEXT/NO when 19200 = OFF ? is displayed.

  10. Press ENTER/YES when 19200 -> ON ? is displayed.

  11. Press NEXT/NO when CONTINUE ? is displayed.

  12. Press ENTER/YES when 19200 -> ON ? is displayed.

  13. Press ENTER/YES when SAVE CHANGES ? is displayed.


Note: The SET OPTIONS ? menu cannot be terminated if all speeds are set to off.

Return to Task List

DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC
Copyright� 2001 Avaya Inc.
Send comments to MadeEasy Development Team



Always check at the Made Easy Web site for the most current information.