DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC

DEFINITY Made Easy Tools
Issue 3, December 2001



Test the System   

Test Duplicated Switch Processing Element Interchange (if duplicated)

Return to Task List

  1. If Multi-Carrier Cabinet, type status system cabinet number <1-44> and press Enter.
    or
    If Single-Carrier Cabinet, type status system all-cabinets and press Enter.

  2. Verify the screen displays test results similar to Example System Status Report for All Cabinets.

  3. Note the MODE of SPE 1A and 1B.

  4. Type refresh spe and press Enter.

    5. The sytem will display Command successfully completed.

  5. Type reset system interchange and press Enter. This causes the terminal to log off.

  6. Log in as craft again.


Note: If you have a dadmin login and password, you can use them instead of craft and the craft password.

  1. Note the MODE for SPE 1A and 1B should have changed from that noted in Step 3.

Example System Status Report for All Cabinets

Return to Task List

DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC
Copyright� 2001 Avaya Inc.
Send comments to MadeEasy Development Team



Always check at the Made Easy Web site for the most current information.