 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
DEFINITY Made Easy Tools
Issue 3, December 2001
Frequently Asked Questions
How do I set the dip switch for duplicated systems?
Answer
For an R7/R8 upgrade, you replace the old TN772 duplication board with the new TN792 duplication board, which has a 3-position switch located on its face. Verify that the switch is in the AUTO (central) position on both boards so the 2 processors can talk to each other.
(To lock the A SPE on line, put the switches on both boards to the A position; to lock the B SPE on line, put the switches on both boards to the B position.)
|
|
|
|
|
|
|
|
|
|
| Copyright� 2001 Avaya Inc. |
| Send comments to MadeEasy Development Team |
| Always check at the Made Easy Web site for the most current information. |