DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC

DEFINITY Made Easy Tools
Issue 3, December 2001



G3V4vs/R5vs/R6vs to R10si (On-Site)

Remove ground connections [G3V4vs, R5vs, R6vs to R10si]

Return to Task List

  1. Remove the 6 AWG (#40) (16-mm 2) ground wire from the ground block on the rear of the G3vs system.

    2. This wire later attaches to the new control cabinet.

  2. Remove the 10 AWG (#25) (6-mm 2) coupled bonding conductor (CBC) wire from the ground block on the rear of the G3vs system.

    3. This wire later attaches to the new control cabinet.

Return to Task List

DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC
Copyright� 2001 Avaya Inc.
Send comments to MadeEasy Development Team



Always check at the Made Easy Web site for the most current information.