DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC

DEFINITY Made Easy Tools
Issue 3, December 2001



G3V4vs/R5vs/R6vs to R10si (On-Site)

Install or Deliver the License File [G3V4vs, R5vs, R6vs to R10si]

Return to Task List


Caution! This procedure must be done immediately after you upgrade the software. If the license file is not installed within 4 hours, the switch enters a No-License mode and shuts down all call processing.

If you have a direct switch connection:

  1. Go to the RFA website, and, following the instructions in the "Deliver to G3r/G3si/G3csi" chapter of the RFA Job Aid, deliver the License File.

    2. This procedure sends the License File to the switch and installs it.

If you do not have a direct connection:

  1. Go to the RFA website, and, following the instructions in the "Deliver to G3r/G3si/G3csi" chapter of the RFA Job Aid, deliver the License File to your laptop/PC.

  2. Open the License Installation Tool (LIT) application at your laptop/PC.

    3. You can use a customer superuser, craft, dadmin, Inads, or Init login with the LIT application. The craft, Inads, and Init logins may require an ASG key.

  3. Use the LIT instructions to add a switch connection profile to the tool.

  4. Use the LIT instructions to install the License File on the switch.

DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC
Copyright� 2001 Avaya Inc.
Send comments to MadeEasy Development Team



Always check at the Made Easy Web site for the most current information.