DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC

DEFINITY Made Easy Tools
Issue 3, December 2001



R5/R6/R7/R8si to R10si

Check link status [R10si]

Return to Task List

This optional step is to make sure the links are in service before and after the upgrade.

  1. Type display communication-interface links and press Enter. Write down all enabled links.

  2. Type status link number and press Enter for each enabled link.

  3. Write down which links are enabled and in service.


Note: If any links are enabled and out of service, resolve the problem before continuing the upgrade.

  1. Type list signaling group and press Return.

    2. Note the signaling groups listed by number.

  2. For each of the signaling groups listed, type status signaling group < number > and press Return.

  3. If any of the links are not up, take the necessary corrective action to restore the link before continuing with the upgrade.

DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC
Copyright� 2001 Avaya Inc.
Send comments to MadeEasy Development Team



Always check at the Made Easy Web site for the most current information.