DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC

DEFINITY Made Easy Tools
Issue 3, December 2001



R5/R6/R7/R8si to R10si

Power up DEFINITY AUDIX system [R10si]

Return to Task List

If the AUDIX was removed from the cabinet:

  1. Re-install the AUDIX and allow it to boot up automatically.

  2. Check for AUDIX System errors.

If the AUDIX remained in the cabinet but the cabinet was powered down:

  1. Reseat the AUDIX

  2. Power up the cabinet. The AUDIX reboots automatically.

  3. Check for AUDIX System errors.

If the AUDIX remained in the cabinet and the cabinet was not powered down:

  1. At the AUDIX console, hold the Crtl key and type cc.

  2. Type 5 at the prompt.

    3. In about 2 minutes, the AUDIX boots up.

  3. When the system initialization is complete, log in as craft.


Note: If you have a dadmin login and password, you can use them instead of craft and the craft password.

  1. Check for AUDIX System errors.

Return to Task List

DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC
Copyright� 2001 Avaya Inc.
Send comments to MadeEasy Development Team



Always check at the Made Easy Web site for the most current information.